Operating instructions

6.6 JVC Dome
6.6.1 Materials and reference documents
JVC TK-C675 Dome
TK-C675 Programmer’s manual, version 1.00/Feb.1998
TK-C675/C675B Programmers manual (supplement), version 0.01/Dec.1998
JVC CCTV Serial Communication Protocol, Basic Protocol Reference, version 2, Jan.1998
6.6.2 Connecting the dome hardware
White
RS485A
Rx+
Yellow
RS485B
Rx-
6.6.3 Configuration
The dome is mostly configured by On Screen Menu.
Some parameters can be configured by inserting a special code.
For all dome configuration operations SETUP TELEMET RY must be enabled.
Connect the dome directly to the keyboard and a monitor to the dome video output following the general
procedure (see § 6.18 - Procedure for setting a dome/receiver in operation, pag.191).
Go to the dome OSM configuration screen.
T he screen that appears allows access to dome OSM configuration.
ENTER/EXIT PROGRAMMING
Used to enter and exit the dome OSM.
SCAN KEY
To be used in the dome AUTOPATROL menu to indicate the chosen PRESET position.
FOCUS FAR
T o be used as indicated in the dome manual.
FOCUS NEAR
T o be used as indicated in the dome manual.
FOCUS AUTOFOCUS
T o be used as indicated in the dome manual.
ENTER MENU
Page 125 of 193 MNVADCT _0409