Operating instructions

6.5.4 Autopan
From the MAIN menu press the AUTOPAN key to enter the menu for carrying out the specific function.
START AUTOPAN 1... 8
Carries out the corresponding function.
Important note: 'autopan' means the movement shown by the dome as 'auto scan'
The only way to stop a movement in progress is to operate the joystick (Pan or Tilt movements).
6.5.5 Aux
From the MAIN menu press the AUX key to enter the menu for carrying out the specific function.
SET No. X
Activates relay No. X
RESET No.
Deactivates relay No. X
Page 122 of 193 MNVADCT _0409