Operating instructions

6.5 HITRON FASTRAX II Dome
6.5.1 Materials and reference documents
Dome HITRON Fastrax II HID2404SM11P
(HID-2404) Protocol and Examples
6.5.2 Connecting the dome hardware
White
RS485A
TX+
Yellow
RS485B
TX-
IMPORTANT NOTE
Configure inside the dome the Fastrax II Protocol.
6.5.3 Configuration
The dome is mostly configured by On Screen Menu.
For all dome configuration operations SETUP TELEMET RY must be enabled.
Connect the dome directly to the keyboard and a monitor to the dome video output following the general
procedure (see § 6.18 - Procedure for setting a dome/receiver in operation, pag.191).
Go to the dome OSM configuration screen.
T he screen that appears allows access to dome OSM configuration.
ENTER PROGRAMMING
Used to enter the dome OSD
The remaining keys have the same functions as those of the original keyboard. The reader should refer to the
specific manual for the dome.
Page 121 of 193 MNVADCT _0409