Operating instructions

6.4.8 Preset, Scan and Home
The PRESET, SCAN and HOME functions are as described in the general explanation with the following
limitations specific to the dome (see § 4.4.7.1 - Preset, pag.47 e see § 4.4.8 - SCAN MENU, pag.49).
Type Minimum position Maximum position Notes
PRESET 1 128
SCAN 1 128
HOME Carries out the SCAN function to
position 1.
6.4.9 Patrol
From the MAIN menu press the PATROL key to enter the menu for carrying out the movement controls.
START PATROL
Used to carry out the corresponding function.
The special codes are used to set up the patrol sequence positions.
6.4.10 Special codes
Go to the special code insertion screen (see § 6.1.5 - Organising the configuration menus , pag.98).
Some parameters can be configured by inserting a special code.
Number Function
AUTOPAN
301 Store the current position as the first limit switch
302 Store the current position as the second limit switch
XXX X=0..255 autopan speed from slow (X=0) to fast (X=255);
Note: not available on the Saturn model
PATROL
1000 Delete Patrol sequence
1XXX X=1..128 insert Preset position X in the Patrol sequence
2000 Show the Patrol sequence
Page 119 of 193 MNVADCT _0409