Operating instructions

6.2 ELBEX Dome
6.2.1 Materials and reference documents
Dome ELBEX EX/EXC 8000 Instant Dome
EMB Camera (R0.70), Camera ID Code Manual for Digital Camera Control
ECC Camera (R0.70), Command Manual for Digital Camera Control, Dec. 18, 2002
6.2.2 Hardware connection to the dome
White RS485A RS422+
Yellow RS485B RS422-
WARNING
Consult the dome manual for the list of available functions. The access level is 3 (complete
control).
The dome number must be configured correctly. It is not possible to change the dome number by
remote control. See the corresponding manual.
With the particular protocol used by the dome it is not possible to control more than one dome
on the same line at the same moment. The ideal situation is to have one control keyboard for
each line.
6.2.3 Configuration
The parameters can be configured by inserting a special code (see the related section).
For all dome configuration operations it is necessary to enable SET UP T ELEMETRY.
Connect the dome directly to the keyboard and a monitor to the dome video outlet, following the general
procedure (see § 6.18 - Procedure for setting a dome/receiver in operation, page 191).
Page 101 of 193 MNVADCT _0409