User guide

Security System Operation (cont'd)
22
How to Disarm the System
IMPORTANT: If you return and the main burglary sounder is on,
DO NOT enter the premises, but call the police from a nearby safe
location. If you return after an alarm has occurred and the main
sounder has shut itself off, the 6270 will beep rapidly upon entering,
indicating that an alarm has occurred during your absence. LEAVE
IMMEDIATELY and CONTACT THE POLICE from a nearby safe
location.
Disarm the system as follows:
SCREEN ACTION
1. Press the
DISARM
button on any
"Armed" screen. The "User Authorization"
screen is displayed with the instructions
“
To Disarm, Enter Code
”.
2. Enter your 4-digit user code. The
system will disarm. If you have access to
multiple partitions, the
Partition No. &
Description
screen is displayed.