Setup guide

TouchCenter Installation and Setup Guide
6–8
SCREEN ACTION
6. Select the arming mode that will be
activated when the NIGHT button is
pressed on the "Arming" screen. Press
the Apply button to accept the setting, or
press the Back button to cancel your
selection. In either case, the TouchCenter
goes to the "CS Setup" menu screen.
Output Setup Button Function
The Output Setup function allows you to disable Output selection.
There are a maximum of five outputs that can be enabled or disabled.
To set the Output Setup button function, do the following:
1. From the "Home" screen, press the Setup button. The "Setup" screen is
displayed.
SCREEN ACTION
2. From the “Setup” screen press the
System Setup button. The "System
Setup" screen is displayed.
3. Press the Advanced Setup button on
the "Setup" screen. The Enter
Authorized Code: authorization screen is
displayed.
4. Enter your 4-digit Installer code. The
"Advanced Setup" screen is displayed.
5. Press the Output Setup button. The
"Output Setup" screen is displayed.
To Disable the Output selection, press the
Ø symbol on the Output button.
To Enable the Output selection, press the
√
√√
√ symbol on the Output button.
Press the Apply button to accept the
setting, or press the Back button to cancel
your selection.
NOTE: This is a local setting for the graphic
keypad. If user has the maximum number of
keypads on the system, and wants to disable
the same output for all, each keypad will need
to be set individually.