Setup guide

TouchCenter Installation and Setup Guide
5–28
SCREEN ACTION
3. Select the options needed for this user
and press the Save button. The
configuration changes are saved and you
are returned to the User Setup screen.
Time/Date Setup
You can set the time and date from the Set Time & Date screen.
• When the time is set it will be stored in the TouchCenter and sent
to the control panel when you press the Apply button and answer
Yes to the following prompt. Additionally, when using the
TouchCenter with a residential panel, the panel will download its
time into the TouchCenter once an hour after the clock is set.
• If Get Time is pressed, the TouchCenter will download the time
and date from the control panel and exit the Set Time & Date
screen. Note: This button appears with residential panels only.
• If DST On (Daylight Savings Time) is selected, the TouchCenter
will adjust for Daylight Savings time at the month, week and time
chosen.
Setting Daylight Savings Time
From the "Home" screen press the "Setup" button. Press the "System
Setup" button and do the following:
SCREEN ACTION
1. From the "System Setup" screen, press
the Time/Date Setup button. The "User
Authorization" screen is displayed with the
instructions "Enter Authorized Code".