Setup guide

TouchCenter Installation and Setup Guide
5–16
SCREEN ACTION
5. Select Safe Mode and then press the
Apply button.
The “Warning” message "Keypad will
reset to activate changes" is displayed.
6. Press the OK button.
The TouchCenter will reset and restart in
the Safe Mode.
Operating in the Safe Mode
While in the Safe Mode, the Home screen will display the Security
Button, Panic Button, and Message Button. A message at the bottom of
the screen will be displayed, as shown below:
This is a limited mode of operation. While in this mode:
• You can use the Security button to access the Console Emulation
Mode of operation to try to clear your faults, disarm the system, or
enter additional Alpha Keypad commands specified in your panel