Setup guide

TouchCenter Installation and Setup Guide
5–14
and the "Armed" and "Ready" LEDs turn OFF.
• The "Return to Homepage" time setting changes to 30 seconds
and the time will be non-selectable.
• The Security, Message and Lighting screen will not display
system status until an authorized user code is entered.
• The "Setup" menu will not display system status until an
authorized user code is entered.
The system "Operating Modes" menu allows you to access "Normal
Mode", "Safe Mode" and "Demo Mode".
To select the "Options" and "Operating Modes" menu, do the following:
SCREEN ACTION
1. On the “CS Setup” screen press the
Options button.
The "Options" and "Operating Modes"
menu is displayed.
2. From the "Options" menu touch the
"Lighting" button to turn the Lighting
option on or off.
A checkmark appears in the button when
the Lighting option is “ON”.
3. From the "Options" menu touch the
"EN50131 Display" button to turn the
EN50131 option on or off.
A checkmark appears in the button when
the EN50131 option is “ON”.
4. From the "Operating Modes" menu
select "Normal Mode" or "Safe Mode".
5. Press the Apply button to accept all
changes.
Note: DO NOT select the Demo Mode option.
This option should only be selected if instructed
to do so by factory service. When this option is
selected, the keypad will not communicate with
the control panel and any user can select
Advanced Setup screens.