Setup guide

TouchCenter Installation and Setup Guide
5–12
The following icons are displayed on the "Slideshow Setup" screen:
Preview
Previous image
Next image
Add/Remove image from slide show
Set image to home screen
wallpaper
System Setup
Central Station Setup
To Access the “Central Station” screen perform the following:
1. Press the Setup button on the “Home” screen. The “Setup” screen is displayed.
SCREEN ACTION
2. Press the System Setup button. The
“System Setup” screen is displayed.
Press the CS Setup button and the
"CS Setup" screen is displayed.
Note: If the top of the screen is displaying
ECP Error, the ECP address in the
TouchCenter is not valid for the panel that
it is connected to. To change the ECP
address in the TouchCenter when ECP
Error is being displayed, enter the
TouchCenter default code of “4140” to
advance to the next screen.
If enabled, the "User Authorization"
screen is displayed with the instructions
"Enter Authorized Code".
3. Enter your “Authorized Code".