Setup guide

SECTION 5: Setup
5–9
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth
when cleaning the TouchCenter or damage to the touch screen may
occur.
The Emergency screen cannot be accessed while running in the clean
screen mode.
Routine Care
• Treat the components of the security system as you would any other
electrical equipment. Do not slam sensor-protected doors or
windows in the vicinity of the keypad.
• Keep dust from accumulating on the keypad and all protective
sensors, particularly on motion sensors and smoke detectors.
• The keypad case and sensors should be carefully dusted with a dry
soft cloth. Do not spray water or any other fluid on the units.
Home Setup Button Layout
Change the location of the buttons on the display screen as follows:
1. From the "Home" screen, press the Setup button. The "Setup" screen is
displayed.
SCREEN ACTION
2. Press the Disp&Audio button. The
"Display and Audio Setup" screen is
displayed.
3. Press the "Home Setup" button. The
user has the ability to relocate the
"Lighting", "Security", and/or "Message"
button.
4. Select the button you want to move; the
button will disappear momentarily. Select
the desired location by touching that area
on the screen where you want the button
to appear.