Setup guide

SECTION 4: Initial Setup
4–3
TouchCenter Initialization
Power Up
When initially powered, the screen displays the boot sequence as it is
performed. After it is determined what services are available, the
screen displays the "Set ECP Address" screen.
SCREEN ACTION
If the system is incorporating only one
TouchCenter, leave the address set to 1
and press the OK button. The boot-up
process will continue until completion.
If there are to be additional
TouchCenter
units in the system, refer to the
ECP
Address Selection
paragraph in Section 5.
Language Selection
The 6272CV, 6272CBV, and 6272CSV has the functionality to display
six different languages English, European Spanish, Latin American
Spanish, French Canadian, Portuguese, or Italian with the default
being English.
Select a Language
SCREEN ACTION
After the initial ECP selection is set, the
"Languages" and "Blank Display" menu
screen is displayed.
From the "Languages" menu select from
English, European Spanish, Latin
American Spanish, French Canadian,
Portuguese, or Italian.
From the "Blank Display" menu select
"EN50131 Display" to meet European
Standards (refer to page 5-14).
Click OK to accept new settings.
If Cancel is selected, the keypad will
remain defaulted in English and
"EN50131" will not be enabled.