Setup guide

3–1
SECTION 3
Front Panel LEDs
and Navigation Icons
•••••••••••••••••••• ••••••••• •••
In This Section
♦ Front Panel LEDs
♦
Navigation Icons
♦
Panel Fault Displays
•••••••••••••••••••• ••••••••• •••
Front Panel LEDs
The TouchCenter has three LEDs labeled - ARMED, READY and
MESSAGE. The ARMED LED is red, READY LED is green and
MESSAGE LED is yellow. Each LED's on and off state has different
meanings as described below.
LED DESCRIPTION
*ARMED
ON – Security system is armed.
OFF – Security system is not armed.
*READY
ON – Security system is disarmed and
ready to arm.
OFF – Security system is armed or
disarmed but not ready. If disarmed, faults
or troubles are present.
MESSAGE
FLASHING – The system contains new
message(s) for the User
OFF – No new messages.
*Note: If the EN50131 Display feature is enabled, the "Armed" and "Ready"
status LEDs turn OFF until a valid user code is entered (refer to page 5-14).