Instructions / Assembly

3.确定排水管的位置
管道，通过测量下面的排水位置在地板上
单元。在底层地板上剪一个洞
足够大，可以容纳水管存水弯。确保空间没有
管道、地板托梁、供暖管道和
电线。
（图2）
SMARTPAN的使用非常频繁
为了便于安装，建议使用。
4.使用毯子、纸板或其他
清洁保护表面，转动装置
Figure 2
3. Determine the location of the drain pipe,
on the floor by taking measurements of the
drain location underneath the unit. Cut a
hole into the subfloor large enough to
accomodate the plumbing trap. Ensure the
space is free of pipes, floor joists, heating
ducts and electrical wires.(Figure 2)
The use of a SMARTPAN is highly
recommedned for easy install.
4. Using a blanket, cardboard, or other
clean protective surface, turn the unit on its
side so that the unit is properly supported
during drain installation.