User Manual

The exact setting needs to be found
by multiple changes to the sensitivity,
in order to match your specific requi-
rements.
Register the transmitter with the ac-
cording receivers. When setting, use
the baby symbol.
The baby alarm function can be con-
veniently switched on and off with the
baby alarm switch (Figure 1).
Please note:
Using the baby microphone re-
quires a higher amount of energy
from the transmitter. This causes
the batteries to suffer a shorter life
span, the stand-by time reduces
down to approx. 100 days per bat-
tery change.
Therefore we emphasize on using the
»signolux« power supply (Item no.
A-2690-0, available as accessory) if
the »Acoustic universal transmitter«
is used as a baby alarm.
Mounting the »signolux«-transmitter
Important note:
Kindly keep in mind that metal parts
and other building materials may in-
terfere with the transmission of the ra-
dio signal. As they can be either visi-
ble or hidden at the desired mounting
location you should always carry out
a functional test at the mounting loca-
tion before starting the mounting pro-
cess, and, if required, choose a diffe-
rent mounting or installation location if
the reception is not guaranteed.
The »signolux«-transmitter can be
mounted using the supplied wall
mount. To use it, fix the wall mount
onto a wall (or rafter, cupboard etc.)
When mounting onto a brick- or stone
wall, you may need a power drill and
stone bit to do so. Use the supplied
wall plugs in this case. Once fixed,
hang the »signolux« transmitter onto
the wall mount bracket.
6 English