User's Manual

5
Connect one end of the USB cable into the charging
port of the unit, then connect the other end into the USB
jack of the car charger. Plug the car charger into the
cigarette lighter of your vehicle .
The unit is fully charged when the light goes out. After a
full charge, remove the charger from the cigarette
lighter and detach the USB cable from the unit.
(See Diagram 2)
Connect one end of the USB cable into the charging
port of the unit, then connect the other end into a USB
jack of your PC.
The unit is fully charged when the light goes out. After a
full charge, remove the cable from the PC detach the
USB cable from the unit.
1.
1.
2.
2.
Way 2: Using Car Charger
Way 3: Using a Laptop
NOTE: During the charging, you cannot use the Stereo
Amplified Neckloop. Battery life will depend on actual usage
and amplification levels.
Diagram 2
Important! Charging indication will be delayed if the
Neckloop has not been used for a long duration or the
battery is fully drained.
14
7. Product Specifications
Model Name:
Bluetooth Compliance:
Supported Profiles:
Frequency Band:
Modulation:
RF Power:
Operating Range:
Talk Time*:
Standby Time*:
Connection:
Security:
Power Source:
Charging:
Charging Time:
Compatibility:
Dimension:
Bluetooth Stereo Amplified Neckloop
Bluetooth Specifications version 2.1+EDR
Headset, A2DP, AVRCP and Handsfree
2.4GHz ISM Spectrum; frequency
hopping 79 channels
GFSK (Gaussian Frequency Shift Keying)
Class 2, -6-6dBm
Up to 10m (indoor)
Up to 3hrs with neckloop
Up to 13hrs with earhook or earphone
Up to 120hrs
Point-to-Point
Security mode 3 (pairing, encryption,
authentication)
Rechargeable Li-Polymer 450mAh
Universal Adaptor 5V/500mA
3hrs
Mobile phones supporting Bluetooth
1.1 (and above), Headset and/or
Handsfree profiles
76mm X 49mm X 19mm
* may vary based on users operating environment, makes
and models of phones and other Bluetooth devices.
’