Instructions

50
Weather Station with Wireless Outdoor Sensor WS 1822
Time signal transmitter:  Time and Date
 Radio tower symbol
Wireless outdoor
sensor:
 outdoor temperature
 Humidity
Base station:  indoor temperature
 Humidity
From now on, the weather station automatically switches
to receiving-mode multiple times each night. During
this process, the displayed time is compared with that
received from the time signal transmitter and, if necessary,
corrected.
If no sufficiently strong signal has been received,
the base station aborts the receiving process after a
few minutes and the radio-tower symbol goes out. The
receiving process is started again at a later point in time.
In this case, the time proceeds as usual (beginning with
the start time of “00:00”).
The data from the wireless outdoor sensor are
transmitted continuously once per minute.
Checklist when data is missing in the display
No data display from the time signal transmitter
1. Check whether the location of the base station is
suitable, see "Choosing a location".
FW Station WS 1822 3 Sprach.indb 50 21.06.2018 15:33:59