User manual

83
Weather Station with Wireless Outdoor Sensor WS 1704
Cleaning
1. During operation via the mains: Pull the mains adaptor
plug out of the base station.
2. Using a lightly dampened cloth, wipe the base station
and wireless outdoor sensor clean, as needed.
3. Dry the device completely before you reconnect it with
the mains adaptor.
Fault/Remedy
Fault Possible Cause
The DCF77 signal for the
time cannot be received.
 Check the chosen
location.
 Start the signal
reception manually, if
necessary.
 Adjust the time
manually.
Temperature indication
of the outdoor sensor
appears too high.
 Check whether the
outdoor sensor is
exposed to direct
sunlight.
Instead of showing the
measured values for
temperature or humidity,
the display shows H.HH or
LL.L.
 The values lie
above or below the
measurement range.
English
FW Station 1704 DE EN.indb 83 31.07.2017 11:30:29