User manual

69
Weather Station with Wireless Outdoor Sensor WS 1704
− Place or hang the outdoor sensor at a position where
it is protected from the direct inuence of the weather
(rain, sun, wind, etc.). Suitable locations are, for
example, under an awning or in a carport.
Use additional wireless sensors
The base station is supplied with a wireless sensor.
However, you can operate it with up to three outdoor
sensors.
For more information or priced order please use the
following email address: [e-mail].
 The outdoor sensors can be situated in dierent
spaces or outdoors.
 Every sensor must be allocated its own number
(= no. of the transmission channel).
Procedure:
1. Place the base station and wireless sensors close
together.
2. Remove the battery compartment cover on the rear
side of the outdoor sensor.
3. For each outdoor sensor, set a unique channel using
the switches. Sensor included in delivery uses by
default channel 1, so select channel 2 for the second
and channel 3 for the third sensor.
4. Insert two batteries of the type indicated on the base.
Pay attention to the correct polarity (+/-).
5. Put the battery compartment cover back in place.
English
FW Station 1704 DE EN.indb 69 31.07.2017 11:30:28