User manual

Weather Station with Wireless Outdoor Sensor WS 1704

No data display from the wireless outdoor sensor

1. Check whether you have inserted the batteries

correctly.

2. Check whether the location of the wireless outdoor

sensor is suitable, see "Choosing a location".

Press and hold

to manually start signal reception

to the outdoor sensor.

Setting the time and date manually

If there is more than approx. 20 seconds between

two pushes of a button, the setting process

automatically ends and you will have to repeat it.

1. Press and hold the

button until the indicator for the

12- and 24-hour time format blinks on the display.

2. Using the

and buttons, set the desired time format

(“12 hr” or “24 hr”).

3. Press

in order to save the settings.

On display “00”.

4. By the

or button, select your time zone (the proper

setting for the most countries of Europe is “00”).

5. Proceed as previously described.

− Press the

or button to set the desired value.

− Press

to save the settings.

English

FW Station 1704 DE EN.indb 65 31.07.2017 11:30:28