User manual
61
Weather Station with Wireless Outdoor Sensor WS 1704
Start-up
Proceed according to the order listed below
and rst insert the batteries into the wireless
outdoor sensor. Only then can the weather
station function without aws.
Do not use rechargeable batteries, since
their voltage is too low (only 1.2 V instead of
1.5 V). This aects, among other things, the
precision of the measurements.
Where possible, use alkaline rather than
zinc-carbon batteries. Alkaline batteries
last longer, especially at low outdoor
temperatures.
Wireless outdoor sensor
1. Remove the battery compartment cover on the rear
side of the outdoor sensor by pressing with a little force
on the imprinted arrow. Slide the battery compartment
cover in the direction of the arrow, away from the
outdoor sensor.
2. Insert 2 batteries of type LR03 (AAA)/1.5 V as depicted
on the bottom of the battery compartment. Pay
attention to the correct polarity of the batteries (+/-).
3. Slide the battery compartment cover back into place
on the outdoor sensor.
English
FW Station 1704 DE EN.indb 61 31.07.2017 11:30:28