User manual
52
Weather Station with Wireless Outdoor Sensor WS 1704
Danger from electricity (when using the
mains adaptor)
Connect the device to a correctly installed socket that
has a voltage corresponding to that described under
“Technical Data”.
Ensure that the socket is easily accessible, so that the
mains adaptor can be pulled out quickly if necessary.
Do not use the wireless weather station if the mains
adaptor or mains adaptor cable are damaged.
Do not cover the mains adaptor with curtains,
newspapers, etc., and ensure sucient ventilation. The
mains adaptor can become hot.
Completely uncoil the mains adaptor cable before
connecting it. In doing so, take care to keep the cable
from being damaged by sharp corners or hot objects.
Pull the mains adaptor out of the socket:
− before cleaning the wireless weather station,
− if, during operation, there appears to be
interference, during a storm.
− When doing so, always pull on the plug, not on the
cable.
Do not make any modications to the item or to the
connection cable. Only allow repairs to be carried out
at a specialist workshop, since inexpertly repaired
devices can present hazards to the user.
Do not replace the mains adaptor cable. When
the cable or mains adaptor is damaged, it must be
disposed of and replaced with a mains adaptor of the
same type.
FW Station 1704 DE EN.indb 52 31.07.2017 11:30:27