User manual
64
Weather Station with Wireless Outdoor Sensor WS 1601
Charging function via USB
Via the USB socket on the rear side of the base station, you
can charge devices such as smartphones or MP3 players
when the base station is being operated via mains power.
Pay attention to the manufacturer’s instructions
for the device you are connecting.
− Connect the USB socket and the external device using
a USB cable (not included).
Display light
Battery operation
− Press the SNOOZE/LIGHT button to switch on
the display light of the base station for approx.
15seconds.
Mains operation
If you operate the base station using the mains adaptor
over the mains supply, the display is permanently lit.
Set brightness
− Set the BACKLIGHT slide control to the desired
brightness level.
HI = High brightness
LO = Low brightness
FW Station 1601.indb 64 11.08.2016 10:28:48