User manual

63
Weather Station with Wireless Outdoor Sensor WS 1601
English
6. Using the buttons or , set the desired snooze time
(pause between two alarms). If you select OFF, the
SNOOZE function is deactivated.
7. Finally, press MODE to save the settings.
Switching the alarm function on/off
− Using the button, turn the alarm function on and
o. As soon as the alarm symbol is displayed, the
alarm function is activated.
Stopping the alarm
At the set time you will be woken by an alarm signal, which
will become more intense as the waking time increases.
Switching the alarm off completely
− Press any button on the base station (except SNOOZE/
LIGHT) to stop the alarm.
Auto-stop function
If you do not press a button, the alarm switches off auto-
matically after 2 minutes. After 24 hours, the alarm will be
triggered again.
Snooze function
− Press SNOOZE/LIGHT when the alarm signal sounds.
The alarm signal goes silent after the snooze time set
by you. Then the device switches back on and the alarm
sounds again.
This procedure can be repeated multiple times. If the snoo-
ze function is activated, “z
Z
” will be shown on the display.
FW Station 1601.indb 63 11.08.2016 10:28:48