User guide

HiLite and VFI2 Visual Fault Identifiers
The HiLite and VFI2 are compact and powerful visible red laser sources designed to
troubleshoot faults on fiber optic cables. Light generated by these units will escape from
sharp bends and breaks in jacketed or bare fibers, as well as poorly mated connectors.
They enable technicians to quickly identify faults in fiber optic jumper cables, distribution
frames, patch panels, and splice trays.
The HiLite and VFI2 are an excellent complement to an OTDR because they can locate
faults inside the OTDR’s dead-zone. Other applications include end-to-end continuity
checks, identifying connectors in patch panels and fibers during splicing operations. The
universal connector interface provides fast operation with many connector styles without
changing an adapter.
Features
Visible red laser source, 650 nm •
High power, 1 mW •
Compact size •
Universal connector interface for quick connection •
2.5 mm Universal adapter included •
Specifications
OPTICAL VFI2 HILITE
Emitter type Laser, Class II FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1:2007-03
Wavelength 650 nm ± 10 nm
Output power 1 mW (into single-mode fiber)
Modulation 2 Hz or CW selected 2 Hz
GENERAL
Adapter 2.5 mm Universal
Power 2 AA alkaline batteries (60 hours typical) 1 AAA alkaline battery (16 hours typical)
Operating temperature -10 to 50°C, 85% humidity non condensing
Storage temperature -30 to 60°C, 95% humidity non condensing
Size (H x W x D) 14.0 x 6.2 x 3.2 cm (5.5 x 2.4 x 1.3 in) 7.0 x 3.6 x 1.5 cm (2.8 x 1.4 x 0.6 in)
Weight < 200 g (7.06 oz) 50 g (1.75 oz)
Ordering Information
MODEL INCLUDES
VFI2 VFI2 unit, instruction card, and carrying case
HiLite HiLite unit, instruction card, and carrying case
Available Adapters
MODEL DESCRIPTION
2900-50-0007MR 2.5 mm Universal adapter
1
with captivated sleeve
2900-50-0010MR 1.25 mm Universal adapter
2
with captivated sleeve
1 2.5 mm Universal adapter accepts SC, FC, ST, E2000, etc. ferrules.
2 1.25 mm Universal adapter accepts LC, MU, etc. ferrules.
VFI 2
HiLite
67