User guide

65
Features
Palm-sized, rugged, lightweight •
CW and modulated Tone •
270, 330, 1000, 2000 Hz Tone •
Power measurements in dBm or µW; •
insertion loss in dB
Reference power level storage •
Large LCD with backlight •
Automatic power-off function •
Battery gauge •
Long battery life with AA alkaline •
Free 50 µm and 62.5 µm mandrels •
Cost-effective, easy to use •
N.I.S.T traceable •
Applications
Certify 50 or 62.5 µm multimode fiber •
links for any 850 or 1300 nm applica-
tion, including Gigabit Ethernet (GBE), per
TIA/EIA standards
Fiber identification prior to splicing •
CKM-2 Contractor Series Multimode
Test Kit with Set Reference
Combining the CSM1-2 optical power meter and CSS1-MM Dual LED light source, the
CMK-2 is a cost-effective test kit designed for performing insertion loss measurements
on multimode fiber optic links. Weighing only 0.4 lb each, both units are compact and
convenient for field use.
The CSS1-MM Dual light source features 850 nm and 1300 nm LED output from a single
output port and offers 2 modes of operation, continuous wave (CW) and user selectable
modulated Tone. The LED output is stabilized to ensure accurate test results per current
TIA/EIA requirements and equipped with a fixed SC connector. A large LCD display with
backlight shows emitted wavelengths [nm], tone frequency [Hz], and indicates a low
battery condition.
The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and features
multiple test Tone detection for fiber identification. The CSM1-2 stores optical references
for each calibrated wavelength. A large LCD display with backlight shows measured power
[dBm or µW] or insertion loss [dB], calibrated wavelengths [nm], tone frequency [Hz],
and indicates a low battery condition. The CSM1 optical input port accepts a variety of
Noyes thread-on style adapter caps (ordered separately) to meet a wide range of testing
requirements. One adapter cap, 2.5 mm Universal, is included.
Both units offer a five-minute auto-off feature and long battery life from common AA
alkaline batteries.
The CSM1-2 and CSS1-MM are fully N.I.S.T. traceable.
continued on the next page
Ordering Information
MODEL INCLUDES
CKM-2 CSS1-MM dual optical light source, CSM1-2 optical power meter, AA batteries, 2.5 mm Univer-
saladapter cap, 50 and 62.5 µm mandrels, user's guide, and carry case.
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL Telecommunications.
The CKM-2 kits may be packed with one of cleaning kit options (purchased separately) as
follows:
MODEL DESCRIPTION INCLUDES
8500-20-0900 Wet Cleaning Kit 8500-10-0016, Cletop -SB
CCTS-25-0900, Connector Cleaning Tips for 2.5mm ferrule in adapters or
sockets (SC, FC, ST in adaptors).Blue (40 sticks per tube). Qty = 2 tubes
FCC2-00-0900, Optical Quality Cleaning Fluid for fiber connector end faces.
8500-20-0901 Dry Cleaning Kit 8500-10-0016, Cletop -SB
8500-10-0024 ACT-01 2.5mm adapter cleaning tips – Qty = 200