User guide

59
OLS1-Dual specifications
OPTICAL OLS1-DUAL (SINGLE PORT)
Wavelength 850 ±30 nm 1300 +50/-10 nm
Emitter type
LED,
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Spectral width 40 nm (typ) 120 nm (typ)
Output power
>-20 dBm
*
Output stability ± 0.1 dB over 8 hours (after 5 min. warm-up)
Fiber size
62.5 µm
**
GENERAL
Power 2 x AA batteries, optional AC adapter
Battery life Typical 30 hours, minimum 20 hours
Available adapters SC, FC, ST
Operating temperature -10 to 50°C, 90% RH (non-condensing)
Storage temperature -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight 0.29 kg (0.65 lb)
* Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used
instead of a 62.5 µm mandrel-wrapped jumper.
** May be used to test 50 or 62.5 µm fiber with supplied mandrels.
All specifications at 25°C.
OPM5-2D specifications
OPTICAL OPM5-2D
Calibrated wavelengths 850, 1300, 1310, 1490, 1550 nm
Detector type Germanium (Ge)
Measurement range +6 to -60 dBm
Tone detect range +6 to -50 dBm
+6 to -45 dBm for 850nm
Wavelength ID range +6 to -50 dBm
+6 to -45 dBm for 850nm
Accuracy
*
± 0.25 dB
Resolution 0.01 dB
Measurement units dB, dBm, µW
GENERAL
Power 2 x AA batteries, optional AC adapter
Battery life 300 hours
Operating temperature -10 to 50°C, 90% RH (non-condensing)
Storage temperature -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight 0.26 kg (0.58 lb)
* Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
All specifications at 25°C
MLP5-2 Multimode Test Kit with Wave ID, Set Reference, and
Data Storage