User guide

23
C860 QUAD OTDR and Certification Test Kit
Features
OTDR dynamic range: •
- 22 dB (MM)
- 26 dB (SM)
Integrated OPM, OLS, and VFL (650 nm) •
OLS sources: •
- LED - 850/1300 nm
- Laser - 1310/1550 nm
Full Auto, Expert, Real-Time OTDR test •
modes
Large transflective (indoor/outdoor) touch •
screen display
Tool-free, switchable test port adapters •
Rechargeable Li-Ion battery (> 8 hours) •
or AC power
USB host and function ports •
Bellcore (GR-196) .SOR file format •
Internal (1000s tests) and USB storage •
Wave ID detect if used with Noyes Wave •
ID series light sources
Windows® compatible software •
Applications
Tier 1 and Tier 2 testing of premise •
networks
Bi-directional two fibers and single fiber •
test capable
Perform Pass/Fail Event and Link •
measurements
Find faults using integrated Visual Fault •
Locator
Splice verification •
Measure loss and length of fiber links •
Certify fibers using Pass/Fail criteria of •
industry standards, applications and
user-defined thresholds
Create professional certification reports •
The Noyes C860 QUAD Certification and OTDR Test Kit from AFL Telecommunications
includes one handheld C840 QUAD OLTS Tester and one C850 QUAD OTDR/OLTS with
built-in auto test functionality. With this kit, technicians can troubleshoot and perform both
Tier 1 and Tier 2 certification tests of MM and SM fiber networks, store results and create
professional test reports.
The C850 is both a QUAD Certification Tester and full-featured QUAD OTDR in a compact
case with a large transflective touch screen display suitable for both indoor and outdoor
operation. The C850 features single-mode and multimode OTDR capabilities, both single-
mode and multimode Optical Light Sources (OLS), Visual Fault Locator (VFL, 650 nm), and
an Optical Power Meter (OPM). As an OTDR, the C850 supports Full Auto, Expert (manual)
and Real-Time test modes, simultaneous dual and single wavelength testing, and Event
and Pass/Fail analysis based on default or user-defined thresholds.
The C840 QUAD Certification Tester includes VFL, OPM, and both single-mode
(1310/1550 nm) and multimode (850/1300 nm) OLS. The C840 may be used alone as a
traditional power meter or light source to measure fiber loss or as a visual fault locator to
find fiber breaks.
Continued on the next page