Operating Manual Electronic Wheelchair Scale, class III approved M50010 ADE GmbH & Co. Hammer Steindamm 27 – 29 22089 Hamburg GERMANY Fax E-mail: +49(40)432776-0 +49(40)432776-10 info@ade-hamburg.
Contents Contents .................................................................................................................................................. 1 Components and Features ...................................................................................................................... 2 Display symbols ..................................................................................................................... 2 Installation and use of scale .................................
Components and Features Keys Function ON ................................ To start the scale OFF............................... To shut the scale off ZERO............................ To set the scale to zero PRESET TARE............. To set a value manually to be tared HOLD............................ To fix the weighing result BMI ............................... To evaluate the BMI (Body Mass Index) SEMI AUTO TARE ....... To tare a value automatically UNITS ...........................
Installation and use of scale Your ADE Electronic Wheelchair Scale is a class III approved scale which has been manufactured for medical use in hospitals, by doctors or medical specialists as well as in rehabilitation centres or nursing homes. The scale is used to evaluate the weight of patients sitting in a wheelchair, able to walk on their own or by using any kind of walking aid or lying on an emergency litter. Due to its high capacity the scale is also used for adipose patients.
Use of the scale where approved scales are imperative The scale corresponds to standards and requirements of the European Directives 90 90/384/EEC and 93/42 EEC. Connecting additional equipment Conditions for connecting additional equipment are fulfilled via RS 232. Metrologic requirements for additional equipment like printer and PC have to be metrologically marked by M on green background.
Use of the scale Weighing Press ON key for min. 3 seconds to power the scale. After start up an automatic function test is done which ends in switching into `0.00´ position in kg weighing mode. The scale is now ready to weigh. In case of any irregularities in weighing procedure the display will show the error indication Err xxx. In this case go to chapter Cleaning, Maintenance and Re-approval, see point Service. After `0.00´ is displayed properly the scale can be loaded.
Set zero By using the Zero key eventual irregularities occurred after start up the scale can be compensated by setting the display back to zero. Hold function Press the Hold key in case of unstable readout which might occur in case of too heavy agitation on the platform. The scale will hold the result displayed. After leaving the scale the fixed weight is still displayed and can be noted. Deactivate the HOLD function by pressing the key again.
Warranty – Liability ADE will repair or replace this product within a period of 2 years from date of delivery applying to defects occurred due to poor material or workmanship (presentation of invoice is necessary). All moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty does not include natural wear, damages caused by incorrect or negligent handling, overuse or unsuitable or improper storage.
Certificate of Conformity D S ... entspricht dem in der Bescheinigung über die Bauartzulassung beschriebenen Baumuster. Die Waage erfüllt die geltenden Anforderungen folgender Richtlinien: 90/384/EWG über nichtselbsttätige Waagen, 93/42/EWG über Medizinprodukte und die Europäische Norm DIN EN 45501. DK ... motsvarar beskrivningen enligt mönstertillstándet.
9 050100-Rev000-M50010
050100-Rev000-M50010 10
11 050100-Rev000-M50010
