User Guide

How to part set the system
If your installer has programmed your system for part set operation you will be able to set some
zones of the system while others remain unset. Part set operation is often used at night time, and it
will permit you to freely walk around the bedrooms while the living area and outside doors are
protected.
Before part setting the system at night time you should ensure the downstairs of the premises have
been completely vacated and that all doors and windows are closed. Ensure that pets do not have
access to the protected areas as they can cause a false alarm.
6
Operating instructions
Panel
Within10 seconds offer keyfob
second time to the Panel
and withdraw
Keyfob recognition beep
The indicator should be lit at the Panel.
Offer a to the Panel and withdraw it
as soon as you hear the
from the local sounder.
Ensure ZONE 1 to ZONE 4 LEDs are Off.
If they remain On, investigate the cause and
ensure the zones are closed.
The system will produce the exit beep
tone. Within 10 seconds o
and you should
now move to area omitted by part set.
The system will set after 30 seconds when two
consecutive beep is emitted.
Day
keyfob
keyfob recognition
beep tone
ffer a a
second time to the Panel and withdraw it,
you hear another
from the local sounder
The indicator should be flashing at the Panel.
keyfob
keyfob recognition beep
tone
Day
Exit beep
Once a any operation is performed
using the keyfob withdraw it away
from the panel, wait for 3 seconds
duration before next use of the
keyfob to operate the system.
Power
Day
Power
Panel
Offer keyfob
to the Panel
and withdraw
Day
2 x Set beep when panel is set