User Guide

Features
ÿ
6 Security zones
ÿ
PA input
ÿ
Tamper input
ÿ
Outputs for External siren (Bell) and Strobe
ÿ
Pre-configured Part set program selectable by
DIP switch.
ÿ
Entry Time duration selectable by DIP switch
ÿ
Entry Deviate
ÿ
Alarm Cycle Counter
ÿ
Strobe confirmation on Set
ÿ
Memorises first and subsequent zone
intrusions in one alarm period
ÿ
Walk Test facilities by push button control
ÿ
Alarm Test facilities by push button control
ÿ
Battery capacity of up to 2.1Ah
ÿ
Up to 8 keyfobs can be used with the panel (2
Keyfobs supplied pre learnt)
ÿ
Learn mode to learn new keyfobs
ÿ
Erase mode to disable lost or stolen keyfobs
2 4188-753 issue 1_1/03
Engineering information
Contents
Features -------------------2
Installation Design --------------3
Fixing the control panel -----------3
Wiring the system --------------4
Tamper network ---------------4
Security zones ----------------5
PA circuit ------------------6
Extension speaker --------------7
External siren Output (Bell box) -------8
13V Supply output --------------9
Set ---------------------9
Factory set condition -------------10
Zone Function ----------------10
First Power up ----------------11
Mains Connection --------------11
Testing the system --------------12
System indications --------------12
Programs ------------------12
Walk tests ------------------13
Alarm tests -----------------13
How to learn new keyfobs ----------14
How to re-learn all keyfobs ----------15
How to learn keyfobs if non are recognised - - 16
Re-arm -------------------17
Alarm Cycle Counter-------------17
Faults --------------------18
Specification-----------------19
Servicing organisation Details --------20
Parts --------------------20