User Guide

Specification
Indicators on
Control panel
Zone 1-6 (red), Tamper -
TA (amber), Personal
Attack-PA, Power, Learn
(amber), Error (red) and
Day (green)
6 Zones +ve loop, Security zones
Tamper -ve loop, always active
PA +ve loop, always active
User keyfobs Up to 8 keyfobs can be
learnt to operate with the
panel
Keyfob operating
range
20mm nominal form
centre depression
Proximity reader 125KHz inductive
External siren
(Bell box) Output
12V, time 20 minutes
continuous
Strobe Output 12V latching
Extension Speaker
16 Ohms 260mA
Exit time 30 seconds
Entry time Programmable by DIP
switch 15 seconds or
30 seconds
Full/Part Set Programmable by DIP
switch
Walk and Alarm
Tests
Selectable by push
button switch
Zone Input Delay 640mS
Set +ve Output 0V in Day (sinking
40mA)
12V in Set (Sourcing
10mA)
Current
Consumption
Control panel
Standby 80mA
Alarm 250mA
Low voltage
output
13.8V dc stabilised
(+/-5%) up to 350mA
Rechargeable
Battery
12V, 1.2 or 2.1Ah
Charge Voltage 13.8V dc (+/-5%)
Board Fuses 1.6A & 1A 20mm quick
blow
Mains Input fuse 125mA, 250V type T
(anti-surge) type
approved to IEC 127,
part 2 sheet III
Total Current
Output
1A when supported by a
fully charged battery
Mains Supply
Voltage
230V (+/-10%) 50Hz
max load 0.2A
Ambient
Operating
temperature
0°C to 40°C
Enclosure
construction
3mm Polycarbonate
Panel dimension H 200mm W 253mm
D 55mm
Keyfob dimension L 58.5mm W 18.5mm
4188-753 issue 1_1/03 19
Logic Six intruder system