User Guide

NVM Error
A Non Volatile Memory NVM error indication
is given by a flashing Error LED. If an NVM
error occurs then you will need to re-learn all the
keyfobs, see page 16.
Re-arm
After an alarm the panel will automatically reset
itself when the external siren (bell box) 20
minute timer has expired.
Alarm Cycle Counter
An alarm cycle is considered as the duration of
an alarm from trigger to the end of 20 minutes
operation of the external siren. The panel allows
three alarm cycles during either set or unset
period. When the third alarm cycle expires the
panel is shut down, the storobe continues to
operate. The panel is unset in the normal way
see operating instructions.
4188-753 issue 1_1/03 17
Logic Six intruder system