User Guide

How to re-learn all keyfobs
4188-753 issue 1_1/03 15
Logic Six intruder system
By entering the in this manner you will erase all
recognition of previously learnt keyfobs at the Panel, except for the
one used to enter the .
learn mode
learn mode
Offer the slightly touch it on the centre depression of the
A learnt indication is given of the when the flashing
LED changes to steady On indication and there is a recognition
beep given by the local sounder. Shortly after the next numbered
indicator will start flashing. Withdraw the learnt keyfob.
You now have up to 10 seconds to start learning another keyfob.
next keyfob Panel
.
next keyfob ZONE
ZONE
keyfob recognised beep
Panel
Next
keyfob
When an unrecognised keyfob is offered to the it will cause
the LED to be lit and continuous sound to be
emitted from the local sounder.
Hold the
The will timeout after if no actions is taken
to learn the next keyfob
Panel
Error
learn mode 10 seconds
recognised slighty touching the centre
depression on the and keep it there without movement
for . Initially you will hear a keyfob recognition beep and
later five rapid beeps from the local sounder. After
another you will hear 5 rapid beep tone from the local
sounder. You are now in the The LED will give a
flashing indication and the LED changes from flashing to
steady On indication to recognise the .
The is now ready to learn the , signalled by the
LED flashing. Withdraw the learnt keyfob.
In the when an already learnt keyfob is offered to the
an Error indication will be given.
‘learnt’ keyfob
Panel
learnt keyfob
Panel next keyfob
Panel,
20 seconds
10 seconds
10 seconds
learn mode. Learn
ZONE 1
ZONE 2
learn mode
Repeat to learn the
Once all the keyfobs are recognised ‘learnt’ by the wait for just over
10 seconds for the Panel to exit the this is announced by two
beeps from the local sounder and return to mode indication.
next keyfob.
Panel
learn mode,
Day
x 2 beeps
keyfob recognised beep
Panel
Learnt
keyfob
x 5 rapid beeps
Hold for
20 seconds
Using a recognised the can re-learn up to 8 keyfobs. You may want to do this after
a keyfob is lost or stolen and you want to prevent the use of it to operate the system.
learnt keyfob Panel
Keyfobs must
be learnt by each installed in a systemPanel
Ensure the is in the day mode with the LED lit. You must
have one and up to 7 further keyfobs to be learnt. Have
all the keyfobs available.
Panel
learnt keyfob
Day
x 5 rapid beeps
Power
Day
1 2 3
Learn
1 2
Learn
1 2 3
Learn
Power
Day