User Guide

How to learn new keyfobs
14 4188-753 issue 1_1/03
Engineering information
Offer a slightly touch it on the centre depression of
the A learnt indication is given of the when the
flashing LED changes to steady On indication and there
is a recognition beep given by the local sounder.
Shortly after the next numbered LED will start flashing.
Withdraw the learnt keyfob.
You now have up to 10 seconds to learn another new keyfob.
For keyfobs 7 and 8 the indications are TA and PA LEDs
respectively.
new keyfob
Panel. new keyfob
ZONE
ZONE
keyfob recognised beep
Panel
New
keyfob
When an unrecognised keyfob is offered to the it will cause the
LED to be lit and a continuous sound is emitted from the
local sounder.
Hold the
The will timeout after 10 seconds if no action is taken to
learn new keyfob
panel
Error
learn mode
recognised such that it touches the centre
depression on the Panel and keep it there without movement for
You will hear a keyfob recognition beep and
later five rapid beeps from the local sounder.
You are now in the The LED will give a flashing
indication and the LEDs change from flashing to steady On
indication to show recognised or . The is now
ready to learn signalled by the next
flashing LED. Withdraw the keyfob.
In the when an already learnt keyfob is offered to the
an Error indication will be given.
‘learnt’ keyfob
learnt keyfob Panel
new keyfobs
Panel
,
10 seconds.
10 seconds
learn mode. Learn
ZONE
ZONE
learn mode
1
Repeat to learn the
Once all the keyfobs are recognised ‘learnt’ by the wait for
just over 10 seconds for the Panel to exit the this is
announced by two beeps from the local sounder
and return to mode indication.
new keyfob.
Panel
learn mode,
Day
x 2 beeps
keyfob recognised beep
Panel
Learnt
keyfob
x 5 rapid beeps
Hold for
10 seconds
Power
Day
Using a recognised the can learn further keyfobs. A total of 8 keyfobs are recognised
by a Panel. You may want to do this if you have acquired additional keyfobs. Using these procedures
the panel will still memorise previously learnt keyfobs. New k
learnt keyfob panel
eyfobs must be learnt by the .panel
Ensure the is in the day mode with the LED lit. You should
have one and the new keyfobs available.
panel
learnt keyfob
Day
Indication given assumes
2 keyfobs were previously
learnt by the Panel
32
1 42 3
Learn
Power
Day
Learn