User's Manual

SABRE

™

RANGER 5000 User Guide

11.3.4.10 Web

For security purpose, user can change the port of the Web Console.

Navigate to Menu > Settings > Terminal Settings> Web to change the internet browsing port.

By default, the port is 80.

i. Enter the new port number. It can be any number from 1 to 65535.

ii. Click Update for the setting to take effect.

iii. Navigate to Menu > Settings > Terminal Settings> Reboot Terminal and click “Reboot

terminal” to reboot the terminal for the new settings to take effect.

NOTE: After set the port number (e.g. 20), http://192.168.1.35:20 is the address to login the Web

Console.

Figure 66

11.3.4.11 Antenna Pointing Buzzer

Navigate to Menu > Settings > Terminal Settings> Antenna Pointing Buzzer to enable Audio

Assisted Pointing Mode. By default, the antenna pointing buzzer is disabled.

i. Select Enabled to enable the antenna pointing buzzer.

ii. Click Update for the setting to take effect.

Figure 67