User's Manual

SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
45
11.3.4.4 Remote Access
User can control the SABRE
™
RANGER 5000 through Web Console remote access.
Navigate to Menu > Settings > Terminal Settings> Remote Access to enable the Web Console
remote access.
Figure 56
i. Select Enabled to enable the remote access feature.
ii. Select Disabled if you do not need the feature.
iii. Click Apply for the new configuration to take effect.
iv. Enter the allowed Global IP address of the devices.
Figure 57