User's Manual

SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
41
11.3.2 Ethernet
Navigate to Menu > Settings > Ethernet > MAC Filtering to set the allowed MAC address and
the access rights.
The MAC address is a number that uniquely identifies any device connected to a network.
The MAC address of your device will be shown on the page.
MAC Filtering Reject List:
i. Select Enabled to enable this feature.
ii. Select Reject List to block the devices to access the terminal.
iii. Enter the MAC address into the provided space and click Add to update the list.
iv. Click Update to make the new settings take effect.
Figure 49
MAC Filtering Allowed List:
i. Select Enabled to enable this feature.
ii. Select Allowed List to allow the devices to access the terminal.
iii. Enter the MAC address into the provided space and click Add to update the list.
iv. Click Update to make the new settings take effect.
Figure 50