User's Manual

SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
35
11.1.3 Port Forwarding
Port forwarding is a feature for a router (multi-user) mode. This feature configures SABRE
™
RANGER 5000 to direct the incoming traffic on certain TCP/UDP port to a specific port on a local
computer or server through IP address.
Navigate to Menu > Data > Port Forwarding to configure new port forwarding rule.
Figure 41
Follow these steps to add a new forwarding rule:
i. Click Add.
Figure 42
ii. Enter the Incoming Port number range in the provided space.
If only one number, repeat the number in both space, example: 80-80.
ii. Select the Protocol type: TCP (for HTTP) or UDP.
iv. Enter the Destination IP address of your server or the receiving devices in the provided space.
v. Enter the Destination Port number in the provided space.
Example: TCP port 80 for web server.
vi. Click Add to save the settings.
NOTE: Re-activate your data connection for the new settings to take effect.