User's Manual

Page 32 of 39
Fleet One Terminal Installation Manual
4.2 Powering up the system
4.2.1 Switching on the BDU
Use the ON/OFF switch on the BDU’s front panel. It normally takes about 1.5 to 3 minutes for the whole
terminal to be powered up and to register into the satellite network .
Wait for the three LED indicators (“TERMINAL”, ”ANTENNA” and “REGSITERED” ) to turn green.
LED Name
Status
Meaning
TERMINAL
Steady Amber Terminal (BDU) is powering up.
Steady Green Terminal (BDU) has powered up successfully.
Steady Red Terminal (BDU) detects failure state.
Off Terminal (BDU) is in OFF state.
ANTENNA
Steady Amber ADU is powering up.
Blinking Amber ADU is calibrating.
Blinking Green System is performing satellite search.
Steady Green System has locked on to the satellite.
Steady Red ADU detects failure state.
No light (Off) ADU is in OFF state.