User's Manual

Page 32 of 49
Navigate to Settings > Security> Wi-Fi> Security Settings to set password of your Wi-Fi
network.
Security Mode: Disabled or select the security mode for the wireless local area network.
Three different security modes are available:
• Wired Equivalent Privacy (WEP)
For 64-bit encryption - You can enter either 5 ASCII characters or 10 hexadecimal digits
(any combination of 0-9, a-f, A-F, empty string is not permitted).
For 128-bit encryption - You can enter either 13 ASCII characters or 26 hexadecimal digits
(any combination of 0-9, a-f, A-F, empty string is not permitted)
• Wi-Fi Protected Access® Personal (WPA)
You can enter 8-63 characters of keys for the password.
• Wi-Fi Protected Access® 2 Personal (WPA2)
You can enter 8-63 characters of keys for the password.
WPA2 is highly recommended over WEP for a higher level of security.
Note:
The default SSID password of your iSavi
TM
is configured under WPA2 mode.
To help safeguard your data connection and the associated bill, please change the default SSID
password printed on the product label of the your iSavi
TM
to your preferred password as soon as
possible.