User's Manual

Atlas IP Terminal Installation Manual
Page 5 of 34
Declaration of Conformity:
Addvalue Innovation Pte Ltd., 8, Tai Seng Link, Level 5 (Wing 2), Singapore 534158.
declares under our sole responsibility that the Product, brand name as Thuraya and model: ATLAS IP,
Maritime Broadband Satellite Terminal to which this declaration relates, is in conformity with the
following standards and/or other normative documents:
ETSI EN 301 489-1, -17, -19, -20, ETSI EN 301 444, ETSI EN 300 328, EN 60945,
IEC 60950 – 1 AND EN 60950-1,
We hereby declare that all essential radio test suite have been carried out and that the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
The Conformity Assessment procedure referred to Article 10 and detailed in Annex [III] or [IV] of
Directive 1999/5/EC has been followed with involvement of the following notified body(ies):
TIMCO ENGINEERING, INC., P.O BOX 370,NEW BERRY, FLORIDA 32669.
Identification mark: 1177 (Notified Body number)
The technical documentation relevant to the above equipment are held at:
· Addvalue Innovation Pte Ltd., 8, Tai Seng Link, Level 5 (Wing 2), Singapore 534158.
·Signed by Mr. Tan Khai Pang (Chief Technology Officer, September 29, 2014) and
Mr. Prabakar Kuttaniseeri (Manager- Quality Management, September 29, 2014).
SAFETY INSTRUCTIONS
For the sake of safety and protection, read the manual before attempting to use Thuraya Atlas
IP Terminal.
The following general safety precautions must be observed during all phases of operation,
service and repair of this equipment. Failure to comply with these precautions or with specific
warnings elsewhere in this user guide violates safety standards of intended use of the
terminal.
Addvalue Innovation Pte Ltd assumes no liability for the customer's failure to comply with
these requirements.
Hazard Symbols
Antenna Radiation Warning
and Distance to other
Radiation Equipment
For safety reasons, all personnel must keep at least 2
meters from the ADU.