User's Manual

Place BDU onto the
desired installation
area.
Secure the right
mounting bracket
using M5 x 12mm
Self-Tapping Screws
(2x).
Secure the left
mounting bracket
using M5 x 12mm
Self-Tapping Screws
(2x).
On the BDU’s front panel,
connect and secure DC
power cable, antenna
cable and primary
handset cable.
Graphical Representative Only.
Connect antenna cable to
ADU properly without kinking
it. Ensure that there is a
rubber gasket between the
ADU’s base and the mounting
surface of the pole mount or
mast.
Secure ADU to the pole
mount or mast by using
M6 x 25mm screws and
flat washer
s
.
Atlas IP Terminal Simplified Block Diagram
+24V/+12V DC
Above Deck Unit (ADU) Installation
Below Deck Unit (BDU) Installation
1
2
2