User's Manual

Atlas IP Terminal Installation Manual
Page 19 of 34
2.3 Installation of Primary Handset and Cradle
2.3.1 Connecting Primary Handset with a Cable Holder
The procedure of the installing Primary Handset with the cable holder is simple as follow:
a. Connect the handset to BDU’s handset port.
b. Mount the cable holder to secure the handset connector against the BDU’s front
panel.
c. At the bottom of the BDU, use M3 x 8 mm screw to secure the cable holder and
handset’s connection to the BDU’s handset port. This is important especially when
the BDU is being mounted on the wall.
Cable Holder
M3 x 8mm Screw