User's Manual

SAFARI
TM
System User’s Guide
3
Connecting To a Computer
To connect a computer to the SAFARI
TM
Transceiver Unit you need a LAN (Category 5)
Cable.
1. Plug one end of the LAN cable to a PoE RJ-45 port meant for DATA and the other
end to your computer network port.
2. Use the Web Console as listed in the Data Menu section of Chapter 4 - Using the
Web Console, to configure the SAFARI
TM
Transceiver Unit and activate a data
connection.
Using a Standard Phone
You can connect a standard analog corded or cordless phone to the PHONE port using the
included IP44 rated RJ11 phone cable to make and receive voice calls.
When there is an incoming standard voice call, all the phones connected to those ports will
ring. Once one of them answers the call, all other phones will stop ringing.