User's Manual

SAFARI

System User’s Guide

 TCP (e.g. for HTTP, it will be TCP)

 UDP

5. Enter the Destination Port number in the space provided (For example: listening port

of the particular service (for example TCP port 80 for web server) on the PC that is

connected to the SAFARI UE).

6. Click Apply to allow the settings to take effect.

Settings

You can select the Ethernet mode to be used for data connection.

Follow these steps to select the Ethernet mode:

1. Select the desired mode to be used during the data connection:

 Router (Single User) is with NAT/PAT disabled

 Router (Multi-User) is with NAT/PAT enabled for multi-user.

Note:

You cannot change the Router settings while a Data connection is active, you must

first disconnect you Data session.

2. Check

“Always On (Auto PDP Context Activation)” if required.

3. Click Update to allow the selection to take effect.

 Click Refresh to query the current mode.