User's Manual

SAFARI
TM
System User’s Guide
5
Satellite Selection
The default Satellite Selection is in Auto mode. In Auto mode, the UE will scan all the visible
satellites and track the satellite with the most optimum elevation angle or the last used
satellite.
Note:
Changing the satellite selection will terminate any existing active voice/fax call or data
connections.
Follow these steps to change your satellite selection:
1. Click .
2. Click Satellite Selection to view the visible satellites.
The visible satellites will be displayed for your selection.
It also displays the satellite information that your Antenna Unit‟s antenna is locked on
to.
3. Click on your choice of visible satellites.
4. Click Select to point the antenna to the selected satellite in exclusive mode.