User's Manual

SAFARI
TM
System User Guide
34
Security settings Menu
The Security Settings menu provides the following sub menus to
configure the security settings of the UE using different PIN:
Transceiver PIN
SIM PIN
There are two options available for selection under each sub menus to manage the PIN and
security settings for the UE:
o Enable
Enable the selected PIN. Table below summarizes the default PIN codes for each
security setting:
Transceiver PIN
0000
Note:
Transceiver PIN is the same PIN that has to be entered
when performing Limited Reset on the UE
SIM PIN
Depends on your SIM card. Consult your equipment distributor if
necessary.
Note:
You have to enter the PUK (PIN Unblocking Key) to access
the SIM card if a wrong PIN for SIM PIN and SIM PIN2 has
been entered for three times. You will be asked to enter the
new PIN code once you have entered the correct PUK.
However, the SIM card is no longer usable if you have
entered wrong PUK for 10 times.
You will be asked to key in the existing PIN (or default PIN if it has not been changed)
before the PIN can be enabled.
o Disable
Disable the selected PIN. You will be asked to key in the existing PIN (or default PIN
if it has not been changed) before the PIN can be disabled.