User's Manual

SAFARI

System User Guide

Making a Voice Call

Note:

Before making a voice call, please make sure that:

- The Primary Handset is connected to the UE (

status indicator should be

on)

- The Primary Handset is NOT radio silent( status indicator should be off)

- The UE has successfully registered with the network and ready for CS domain

(voice) services (

status indicator should be on)

You can use the following two options for making a voice call:

 Manual Dial:

1. Using the alphanumeric keypad, dial 00 <country code> <phone number>.

2. Press

key.

 Using Contacts or Call Log list from the Primary Handset:

o Enter the Contacts list of the Primary Handset; scroll to the desired number

and press key, or

o Enter the Log list of the Primary Handset; scroll to the desired number and

press

key.

Note:

For voice calls and SMS, you may also use '+' by pressing and holding the

key

instead of “00” at the beginning of dialed number string as an alternative („+‟ <country

code> <phone number>).

To End a Voice Call

1. Press .

Receiving a call

When there is an incoming call, the Primary Handset will,

 Ring

 The calling party’s number will be displayed on the screen.

If the number is stored in the contacts, the corresponding name of contact will be

displayed.

To answer an incoming call, press the key.